—— Mohammed-Saudi Arabia
—— Andrew-South Africa
Payment & Shipping Terms:
|Color:||Green,orange,yellow,blue||Flow:||300 Liters Per Hour To 20000 Liters Per Hour|
|Working Vacuum:||0.06-0.095Mpa||Working Pressure:||≤0.4Mpa|
|Water Content:||≤20ppm||Power Supply:||380V/3P/50HZ(can Be Designed)|
|Inlet/Outlet Caliber:||DN25 Mm To DN60 Mm||Dimension:||1m X 0.9m X 1.1m(can Be Designed)|
|Weight:||200KG(can Be Designed)||Optional:||PLC, Mobile Trailer,enclosure,frame,hook,flow Meter,quick Connector|
This technology is different from the traditional distillation process with sulfuric acid,it is also different from the current hydrogenation technology. The process of this technology is: Catalyzing treatment of waste lube oil (including gasoline engine oil,diesel engine oil ect. almost all sorts of recyclable waste oil), and then distill to new lube base oil. The oil will not mean to oxidate and change color, no odour. The residues can be used as fuel, it will not make secondary pollution. This technology is high automatic, the operation is simple, no complicate operation control, easy to learn and understand, low labour intensity, 1-2 persons are enough and no special requirement.
The used oil is mixed with catalyst in chemical treatment tank, then it is sent to distillation kettle to have it circulated and heated, while the temperature increasing, the oil gas is distilled out and cooled in to liquid through three stages cooling, they’re separately stored in water, gasoline/diesel, light lube oil, heavy lube oil receivers. The noncondensable gas will be sent to the furnace of boiler to have it burned and discharged after pass through waste gas disposer to ensure “zero “discharge of waste gas, The residues can be utilized as fuel to avoid pollution from it.
engine oil distillation used oil recycling plant
1. Easy to operate, low operation cost
2. Environmentally friendly, without secondary pollution.
3. The machine can recycle gasoline oil, diesel oil, engine oil, rubber oil and other lubricant oil to clean oil.
4. High quality refined oil, no any discoloration caused by oxidation, no any bad smelling.
5. Low cost contain:
1) only need the catalyst chemical, the cost is less thanUS$30 to refine one ton waste oil.
2) Heat consumption: 105kcal per ton waste oil
3) Power consumption: 40Kwh to recycle 1 ton waste oil
6. High degree of automation.
Light Lubrication oil
Heavy Lubrication oil
Treated Oil Analysis (take the waste diesel engine oil for example)
Heavy Lube oil
Light Lube Oil
Viscosity Index ≥
Anti-oxidation 150°C,min ≥
Flash Point(Open)°C ≥
Pour Point °C ≤
neutralization value (mgKOH/g) ≤
One year guarantee for product quality. (People damaged parts are charged).
Lifelong maintenance and spare parts supply.
Free design of fixtures as customers required.
Free training for machines installation and operation of the staffs.
Tel: +86 23 62538144
Fax:+ 86 23 62538144-3
Branch 1: www.oilpurifiertech.com
Branch 2: www.oilfiltration123.com