—— Mohammed-Saudi Arabia
—— Andrew-South Africa
Payment & Shipping Terms:
|Apply:||Turbine Oil Purifier||Capacity:||600 To 18000lph|
|Power:||380V,3P,50HZ Or As You Require||Color:||Blue,yellow,white|
Turbine oil is used as lubricant for the spindles of the host and auxiliary in various steam turbines, e.g.: steam turbine, water turbine, gas turbine etc.
Steam turbines are widely used in the power industry as prime movers for generators. As a paramount component to a company's production, HOPU TY Turbine Oil Purifier generally run on continuous operating schedules.
With the temperature and pressure of the steam from turbine increasing, and escalation of capacity, the oil temperature is higher and higher, and thus lead to more demanding requirements of turbine. In addition to requirements of good oxidation stability and anti-corrosion, but should also have the requirements of anti-foam, anti-emulsification, extreme pressure and air release. Besides, there are free water, dissolved air and gases, sludge, varnish, sediment, particulate in aging turbine oil or waste turbine oil. Thus, turbine oil purification system should be used.
Our TY Series oil purification system:
TY Series Turbine Oil filter machine adopts vacuum dehydration process to remove emulsified and dissolved water from turbine oil as well as fine particulate and gasses. The Turbine Oil Purifier system are self-contained, skid mounted and offer a P.L.C. controlled full status control panel for fully automatic operation.
TY machine features:
1. Ready for operation before leave factory;
2. Continuously oil cleaning;
3. On-line water content measuring device (optional)
4. Equipped with automatic Anti-Foam Control System.
5. Equipped with built-in control and safety devices, which provides for a maximum operating security.
6. Minimum power consumption through optimum degassing (excellent efficiency factor).
7. Standardized filter housing for 1 micron , 5 micron, 20 micron and 80 micron filter cartridges.
8. Automatic supervision of the contamination degree of the fine filter cartridges
9.PLC controlled available(optional).
Oils can be processed by TY:
Steam turbine oil; gas turbine oil; low-viscosity lubricating oil, etc. Such as turbine oil ISO VG 22-32, ISO VG-46, ISO VG 100.
|Working pressure||MPa||≤ 0.4|
|Temperature range||C||20 ~80|
|Demulsifying value||min||≤ 15/min(GB/F7035)|
|Water content||ppm||≤ 80|
|Gas content||%||≤ 0.1|
|Cleanness||≤ NAS 6 grade|
|Power supply||380V 50HZ 3Ph (As per user's option)|
Break emulsification value
≤15min (GB/F 7305)
Tel: +86 23 62538144
Fax:+ 86 23 62538144-3
Branch 1: www.oilpurifiertech.com
Branch 2: www.oilfiltration123.com